Tag Archives: “8 Series”

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP8 Build # 328728

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP8 Build # 328728

11.4.2 – CSP8 Build # 328728 Resolves the following issues:

BUG60697: Import of customer CA Root causing FSM to show java error message

BUG63136; Improved proxy connection handling to prevent file transfers from stalling during periods of high proxy

connections.

BUG63222, BUG63468,BUG62925,BUG62934: Resolved issue resulting in proxy processes becoming stuck. As a result of

the stuck proxy process a low memory state will occur causing the Firebox to stop passing all traffic.

BUG62358: Resolved issue causing throughput degradation due to excessive ARPing from the Firebox when using

FireCluster Active/Active.

BUG63702: Firebox will not failover to secondary log server when log collector’s cache is full.

BUG62024,BUG63035: Resolved issue which caused a PPPoE process to stop responding resulting in the PPPoE connection

not returning after down event from ISP.

BUG56483,BUG62518: FC has to be rebooted every time for 3rd party cert to take effect after a failover event.

You can request 11.4.2 – CSP8 Build # 328728 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP7 Build # 328158

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP7 Build # 328158

11.4.2 – CSP7 Build # 328158 Resolves the following issues:

BUG62966: file descriptor leakĀ  when running FireCluster causing management connections to the Firebox to fail.

BUG62837: traffic monitor goes blank or update delay for 1 min due to invalid xml characters

BUG62104: Proxy cfm worker4 crash during high load.

You can request 11.4.2 – CSP7 Build # 328158 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP6 Build # 327576

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP6 Build # 327576

11.4.2 – CSP6 Build # 327576 Resolves the following issues:

BUG61858: SSLVPN failed to complete connection after FireCluster Failover

BUG60533: constant log messages from sslvpn_firecluster process after upgrade to 11.4.2

BUG61152: Issues with Multi-WAN DHCP using the same default gateway

BUG56182: GAV scanning fails with logs: GAV job open failed () errors

RFE41602: iPhone/iPad support for built in Cisco IPSec client

BUG60378: Improved proxy connection clean up logic to remove some stale connections faster.

You can request 11.4.2 – CSP6 Build # 327576 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP5

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP5

11.4.2 – CSP5 Resolves the following issues:

BUG57523: Resolved kernel crash associated with EIP: f8ced295

BUG60036: unicast MAC is used for 1-1 NAT addresses on an A/P cluster

BUG57440: Certain .xls files fail to transfer via FTP proxy

BUG63009: GAV with FTP proxy unable to upload attached file

BUG62787, Some default certificates are missing after FireCluster upgrade or failover

BUG62581; BUG63152: FireCluster failovers caused Firebox to show inactive state

You can request 11.4.2 – CSP5 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.