Netgear DGN1000 Wireless-N Router with Built-in DSL Modem default username and password
Username: admin
Password: password
IP Address: 192.168.0.1
URL: http://192.168.0.1 or http://www.routerlogin.net or http://www.routerlogin.com
Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP2 Build # 352335
Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP2 Build # 352335
11.6.1 – CSP2 Build # 352335 Resolves the following issues:
BUG68090: static routes lost, when PPPoE interface goes down
BUG68183: Multi-WAN Failover Mode PPPoE/Static not working. Default path missing + incorrect DNAT
BUG68986: the “Ip range” style for SSO exception doesn’t work
BUG68370: Cluster member crashes after several successive failovers
BUG68650: kernel Crash when test HTTP Packet filter + IPS and APP on XTM26
BUG69050: kernel crash and reboot EIP ec1c96cb EIP is at br_netfilter_fini+0x221/0x26e [bridge]
BUG65848: Customer’s active FTP is not working
BUG67666: AP scan (Rogue AP Detection “Scan Now”) crashes the kernel with Wireless WAN
BUG68298: Traffic be interrupted when wireless connection occurs on External
BUG66032: XTM2 Wireless will run 1 -2 hours then will lockup with Wireless WAN enabled
BUG68232: With multiwan, DHCP wan interface become down logically, PPPoE interface will down for 1mins
You can request 11.6.1 – CSP2 Build # 352335 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.
Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.
Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP1 Build # 350391
Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP1 Build # 350391
11.6.1 – CSP1 Build # 350391 Resolves the following issues:
BUG66975: FSM traffic monitor shows blank due to log entries without seq attribute
BUG65521: unnecessary firewalld error message in appliance log
BUG66635: Unnecessary log message – 2012-05-02 11:25:56 firewall block_dump: Select timed out Debug
BUG65537: Change in Policy Schedule does not stop existing proxy session
BUG67116: MultiWAN – Outbound PBR failure with default settings – Interface not down
BUG68127: Cross site scripting vulnerability using login Failure from FW Auth Server on 4100 and SSLVPN
BUG68026: BUG66200: Slow Kernel Memory Leak caused by BOVPN
BUG68163: No BOVPN tunnel route due to probable iked failure to learn a new dynamic ip
BUG68188: BOVPN failure with dynamic IP site due to inconsistent DNS name resolution
BUG68237: iked crashes in ike_config_set_policy
BUG67961: iked died unexpectedly on signal 11
BUG66772: IKED stack trace occurring when disconnecting MoVPN IPSec (Safenet Client) connection
BUG68247: Tunnels may fail after upgrade
BUG68886: High CPU usage with high number of BOVPN tunnels
BUG67927: Active / Active mode cluster load balance does not work after health index is lower on one box
BUG67447: WebBlocker fails with logs “failed to send server-request”
BUG68344: SSO exceptions list will trigger when the last octet of the IP is in the exception
BUG65288: kernel crash and reboot
BUG66872: A/P Cluster Member reboots kernel BUG at /builds/utm-11_5_3/src/340457/ip_set.c:507 EIP e033af7d
BUG66809: A/P Cluster Master reboots kernel BUG at /builds/utm-11_5_3_csp/src/341451/EIP: ec2b9f59
BUG65179: Interface traffic stopped EIP: <e02ac7b> EFLAGS: 00010246 CPU:3
BUG67994: loggered crash EIP: 0060:[<dff85f64>] box reboots
BUG67866: Kernel crash and reboot (EIP: e034df64)
BUG66670: XTM1050 reboot with crash log EIP:0060:[<dff64f7b>]EFLAGS:00010246 CPU:1
BUG68302: XTM8 locking up and rebooting
You can request 11.6.1 – CSP1 Build # 350391 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.
Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.
Watchguard System Manager – 11.6.1 – CSP1 Build # 348296
Watchguard System Manager – 11.6.1 – CSP1 Build # 348296
Watchguard System Manager – 11.6.1 – CSP1 Build # 348296 Resolves the following issues:
BUG68447: 11.6.1 management server fails to apply 11.3.x template to fully managed 11.3.x device
You can request Watchguard System Manager 11.6.1 – CSP1 Build # 348296 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.
Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.