Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

11.6.1 – CSP3 Build # 354688 Resolves the following issues:

BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels

BUG69624: Limit rate of phase one auto start after reboot

BUG69377  Incorrect model number displayed with MODEL 505 license

BUG69625: iked crash sig 6, sig 11

BUG68554: Interface failing to route and not listing ‘inet addr’ in status report > interfaces

BUG68312: SIP proxy causes CFM restart due to memory cap violation

BUG67656: Process `cfm.5′ with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP)

BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup

BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6

BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails)

BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box

BUG69090: VPN tunnel fails and stops passing traffic – xfrm_dst_cache value exceeded in slab info

BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050

You can request 11.6.1 – CSP3 Build # 354688 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Leave a Reply

Your email address will not be published.