Tag Archives: Memory

11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 21, 22, 23, 25, 26, 33, 330, 505, 510, 515, 520, 525, 530, 535, 545, 810, 820, 830, FireBox, Watchguard, XTM

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

Leave a comment

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

11.6.1 – CSP3 Build # 354688 Resolves the following issues:

BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels

BUG69624: Limit rate of phase one auto start after reboot

BUG69377  Incorrect model number displayed with MODEL 505 license

BUG69625: iked crash sig 6, sig 11

BUG68554: Interface failing to route and not listing ‘inet addr’ in status report > interfaces

BUG68312: SIP proxy causes CFM restart due to memory cap violation

BUG67656: Process `cfm.5′ with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP)

BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup

BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6

BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails)

BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box

BUG69090: VPN tunnel fails and stops passing traffic – xfrm_dst_cache value exceeded in slab info

BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050

You can request 11.6.1 – CSP3 Build # 354688 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

3CX, 821, 870, Cisco, Exchange, Exchange 2013, IP Phones, Microsoft, Phone System, Service Pack 2, Snom, v11, V8.7.3.15, V8.7.3.15, Windows, Windows 8, Windows Server 2012

3CX Version 11 – Service Pack 2 (Build 27588.780) Released

Leave a comment

3CX Version 11 – Service Pack 2 (Build 27588.780) Released

Service Pack 2 introduces the following fixes and new features:

New Features

  • New: Added support for Windows 8 and Windows Server 2012. Previous releases of 3CX Phone System are unsupported on Windows 8 / Server 2012, and thus a new installation of SP2 is required on these OS.
  • New: Added support for Exchange Server 2013. For more information on configuring an Exchange Server 2013, review this blog post.
  • New: IP Whitelist for the Anti-Hacking module.
  • New: Blacklist is checked for WEB requests. When someone tries to connect to the web 3CX Management Console, 3CX MyPhone or provision a phone from a blacklisted IP, the request will be blocked, and the administrator is notified (if notifications are enabled).
  • New: Added support for the latest Cisco SPA 514G and 525G2 phones with the latest firmware. Please note, phones running firmware 7.4.9b need to be updated to version 7.5.2b before being upgraded to version 7.5.3. This applies to all Cisco phones.
  • New: SNOM can now be configured using Plug and Play. SNOM is now supported from the firmware version 8.7.3.15.

3CX MyPhone

  • Update: The Active Calls section in 3CX MyPhone has been redesigned. Users can only see their own calls by default. If allowed, they can see the calls to users in their group. The management group still sees everything.
  • Update: Conference calendar request (.ics) notifications are now sent even when the email server requires authentication.
  • Update: Dashes and () are stripped when an external conference number is added to the conference.
  • Fixed: A bug in 3CX MyPhone when adding callers which are on hold to a conference.
  • Fixed: The audio issues when creating conferences in 3CX MyPhone have been fixed.
  • Fixed: The bug which caused the Microsoft Outlook plugin to not create journal entries for incoming calls
  • Fixed: The organizer’s email address is now stored correctly when scheduling conference calls.
  • Fixed: The organizer of a conference is now informed when a user has accepted or declined the conference invitation and details are correctly retrieved from the calendar.
  • Fixed: When changing the language to Portuguese, 3CX MyPhone now loads in Portuguese.

3CX Phone System Server

  • Update: 3CX Phone System User Agent string now contains the version number.
  • Update: Added G729 Support for Patton Gateway Templates BRI devices which has fixed the audio issues.
  • Fixed: Caller ID is not retained when call is diverted (using 302 diversion header).
  • Fixed: Bug in 302 diversion header – Diversion header contents are now enclosed in <>
  • Fixed: Crash of 3CX Phone System caused by incorrectly configured Outbound Rules.
  • Fixed: Exception in Call History service when an email is sent to an invalid address.

IP Phone, PSTN Gateway and VoIP Provider Interoperability

  • New: Grandstream HT 701, 702, and 704 templates have been added to  main 3CX Phone System installer.
  • Update: Firmware auto-provisioning is removed in Grandstream templates.

3CX Web Reports

  • Update: Ring group reports have been moved to Advanced Call Reports.
  • Update: In the extension statistics, a limit of 10,000 call records has been hard coded which has sped up the report.
  • Fixed: Call Logs are properly generated on Italian language operating systems.
  • Fixed: Calls that breach SLA time are now shown correctly.
  • Fixed: Bug where the SLA breach time was not being observed and all calls where marked as breaching SLA.

3CX Management Console (Interface)

  • Update: Outbound rules page now shows the Extension Groups in the summary page.
  • Update: Added exception in the Windows Firewall for the 3CX Windows Management Console. This is required for the 3CX Firewall Checker.
  • Update: Moved configuration of the Billing Information from the top menu bar to the Advanced page.
  • Update: Server Activity Log now indicates when a packet is dropped because of a hacking attempt.
  • Update: Email notification sent to a 3CX Administrator or Operator extension when the 3CX Upgrade Insurance is about to expire.
  • Update: Improved general speed of Windows-based 3CX Management Console.
  • Update: Tagged license messages in the Server Activity Log.
  • Update: The size of the Abyss webserver log file has been minimalised as the file is now backed up and recreated.
  • Fixed: Service pack updating fails when Microsoft Management Console (MMC) is running on the computer.
  • Fixed: Provisioning of 3CXPhone for Windows, iPhone, and Android now sets the STUN server to the Public IP address of 3CX Phone System. (Note: Public IP Address needs to be configured).
  • Fixed: The 3CX VAD integration when text to speech project is deployed with characters containing an accent.
  • Fixed: IP blacklisted entries not completely removed causing a delay and high CPU usage on incoming calls.
  • Fixed: Crash in the Server Activity Log when logs are viewed in Google Chrome.
  • Fixed: There will no longer be any blank pages within the Server Activity Log.
  • Fixed: Log files were not being moved to backup folder and remained in the Logs folder. As a result this made the 3CX Management Console very slow and affected also the general performance of the computer.
  • Update: The 3CX Server Activity Log now shows INVITE and RE-INVITE SIP messages. These can be seen when Verbose is enabled.

3CX Log Viewer

  • Update: Gradual opening of logs to avoid high CPU usage.
  • Fixed: Various memory leaks.

3CX Backup and Restore

  • Fixed: The crash that occurs on Russian language Windows Operating Systems.
  • Fixed: Exception in 3CX Backup and Restore when a backup is made whilst a recording or a voicemail is in progress.
  • Fixed: 3CX Backup and Restore will now backup recordings when recordings path is not the default directory.
  • Fixed: The restore procedure will create recordings file structure in case it does not exist.
11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 21, 22, 23, 25, 26, 33, 330, 505, 510, 515, 520, 525, 530, 535, 545, 810, 820, 830, System Manager, Watchguard, WSM, XTM

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

Leave a comment

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

11.6.1 – Build # 346666 Provides some new features and resolves the following issues:

• This release introduces support for the new high-performance XTM 5 Series models 515, 525, 535, and 545

• Provides an update to our localized user interfaces and documentation

• An XTM device configured in bridge mode can now pass VLAN traffic between 802.1Q switches or bridges

• FireCluster support for XTM 25, 26, and 33 wired models

• Several issues have been resolved in this release that caused XTM devices to crash when configured to use Application Control or IPS [66937, 65426, 65636, 67312, 66135, 67159, 67399, 67310]

• An issue was resolved that caused some XTM device processes to crash when running Mu Dynamics default published vulnerability test [66490]

• An issue was resolved that caused a kernel crash and device reboot [67329]

• The XTM 2 Series device can now handle a large file transfer without interface instability [67367]

• A problem that caused incorrect data to display on the XTM 5 Series LCD screen has been resolved [67197]

• Policy Manager now displays the correct VLAN limits for XTM 5 Series models 505, 510, 520, and 530 with a standard Fireware XTM feature key (not Pro) [67780]

• You can now successfully configure and apply Traffic Management actions for XTM 2 and 3 Series devices from the Web UI [67221, 66645]

• Firebox X Edge e-Series devices can now be successfully managed with templates [67658]

• The notification message sent when a local Log or Report database is down now correctly shows the host IP address instead of “???” [41731]

• The Log Server can now handle backup files greater than 2GB in size without generating an error message: “Error (8199), Exception during backup of oldest log data: File is not a zip file” exception” [66811]

• The DHCP lease activity report now works correctly [66062]

• Log Collector now handles XTM device log data that spans multiple SSL/TLS records without crashing [66347]

• A problem has been resolved that caused poor performance on XTM 2 Series models 25 and 26 because of an incorrect memory allocation for security subscription signatures [67240]

• A deny message is now correctly sent to the web browser in most cases when Application Control blocks content in the Web/Web 2.0 category [66201]

• The WebBlocker automatic database update time is no longer off by one hour when daylight savings time is in effect on the host server’s timezone [67551]

• If you use PPPoE or DHCP for an external interface on an XTM device configured to use multi-WAN, the XTM device no longer loses the default routes for external interfaces after the external interface reconnects [67424, 67520]

• A problem has been resolved that caused a static route to fail after an external interface configured to use PPPoE is disconnected, then reconnected [67520]

• Tagged VLAN traffic is now correctly recognized when an XTM device is configured in Bridge mode [64355]

• The CLl command “restore factory default all” now successfully restores a device to its factory default settings [66240]

• An issue has been resolved that caused Policy Manager to incorrectly display an interface IP address as 0.0.0.0/24 when you viewed a FireCluster configuration for a cluster in drop-in mode [63551]

• The Mobile VPN with SSL process no longer crashes during a FireCluster failover [66118]

You can download 11.6.1 – Build # 346666 from the Watchguard website

Microsoft, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

Webdav.dll – Pre Service Pack 2 Revision History for Windows 7 SP1, Windows Server 2008 R2 SP1 and Windows Small Business Server 2011 (SBS 2011)

Leave a comment

Webdav.dll – Pre Service Pack 2 Revision History for Windows 7 SP1, Windows Server 2008 R2 SP1 and Windows Small Business Server 2011 (SBS 2011)

04-Nov-2011 – 7.5.7601.21854 – Webdav.dll – x86/x64 – http://support.microsoft.com/kb/2618752 – FIX: WebDAV deletes a file instead of sending an “Access Denied” message

20-Oct-2011 – 7.5.7601.21843 – Webdav.dll – x86/x64 – http://support.microsoft.com/kb/2593591 – FIX: A hotfix is available that enables WebDAV to store the properties of file resources by using NTFS alternate data streams in IIS 7.5

02-Aug-2011 – 7.5.7601.21782 – Webdav.dll – x86/x64 – http://support.microsoft.com/kb/2503820 – FIX: Memory leak in the W3wp.exe process for a WebDAV website when many WebDAV clients upload files, download files, or access file directories in WebDAV 7.5