Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688
11.6.1 – CSP3 Build # 354688 Resolves the following issues:
BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan
BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels
BUG69624: Limit rate of phase one auto start after reboot
BUG69377 Incorrect model number displayed with MODEL 505 license
BUG69625: iked crash sig 6, sig 11
BUG68554: Interface failing to route and not listing ‘inet addr’ in status report > interfaces
BUG68312: SIP proxy causes CFM restart due to memory cap violation
BUG67656: Process `cfm.5′ with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP)
BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup
BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6
BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails)
BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box
BUG69090: VPN tunnel fails and stops passing traffic – xfrm_dst_cache value exceeded in slab info
BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup
BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050
You can request 11.6.1 – CSP3 Build # 354688 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.
Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.