Tag Archives: CSP3

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.3 – CSP3 Build # 362451

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.3 – CSP3 Build # 362451

11.6.3 – CSP3 Build # 362451 Resolves the following issues:

  • BUG70662: The OSS-Config process no longer leaks memory
  • BUG67355: RSS Feeds no longer try and download RSS updates every 6 minutes. The new update interval is 24 hours.
  • BUG70638: Resolved issue causing the iked process to crash under certain conditions.
  • BUG71028: When using FireCluster Active/Passive, with DHCP relay enabled, the Virtual MAC address will no longer be sent from the Backup Master causing network disruption.
  • BUG70975: The SNMP process on XTM 25/26 and XTM 33 will now be restarted automatically in the event it becomes stuck in a dormant state.

You can request 11.6.3 – CSP3 Build # 362451 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688

11.6.1 – CSP3 Build # 354688 Resolves the following issues:

BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels

BUG69624: Limit rate of phase one auto start after reboot

BUG69377  Incorrect model number displayed with MODEL 505 license

BUG69625: iked crash sig 6, sig 11

BUG68554: Interface failing to route and not listing ‘inet addr’ in status report > interfaces

BUG68312: SIP proxy causes CFM restart due to memory cap violation

BUG67656: Process `cfm.5′ with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP)

BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup

BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6

BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails)

BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box

BUG69090: VPN tunnel fails and stops passing traffic – xfrm_dst_cache value exceeded in slab info

BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup

BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050

You can request 11.6.1 – CSP3 Build # 354688 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.5.1 – CSP3 Build # 334971

Watchguard XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.5.1 – CSP3 Build # 334971

11.5.1 – CSP3 Build # 334971 Resolves the following issues:

BUG64440:  Static Arp entries are lost in Firecluster Active / Active when external interfaces goes down and coems backup

BUG64898: Updated sdk from AVG to prevent scand crashing on archive file scanning

BUG64201, BUG64763:  configuration changes not taking effect until reboot (potential fix).

BUG65105:  when using 1 to 1 Nat IP ranges configuration saves may causes packet loss, connection count increase and one way BOVPN tunnel traffic.

You can request 11.5.1 – CSP3 Build # 334971 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP3

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP3

11.4.2 – CSP3 Resolves the following issues:

BUG62624:  Fixed Certd crash

You can request 11.4.2 – CSP3 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.