Category Archives: Small Business Server 2003

Acer, AMD, ASUS, ATI, BSOD, DELL, Fujitsu, HP, Microsoft, ML110 G5, ML110 G6, ML350 G5, ML350 G6, Nvidia, Primergy, ProLiant, Samsung, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Sony, Toshiba, Windows, Windows 2000, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP, XP Mode

Windows will not boot with a Stop Error 0x0000007B

A very common BSOD (Blue Screen of Death) is a STOP error 0x0000007B and may indicate either a hardware, software or driver issue.

Please see the great troubleshooting guide put together by Tim Fisher on about.com

http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

One thing that Tim does not mention is that sometimes it is necessary to slipstream the AHCI SATA Controller Drivers into your Windows XP or Windows Server 2003 installation media.  This can easily be done by downloading and using nLite to slipstream drivers and updates into your Windows XP or Windows Server 2003 CD Media, you can get the application from http://www.nliteos.com/

Common AHCI Sata Drivers include:

Intel – http://downloadcenter.intel.com (Look under Chipset, Chipset Software and then Intel Rapid Storage Technology.  You will need the F6 Drivers for either x86 or x64 depending on you using 32bit or 64bit windows)

Nvidia – http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk or http://www.nvidia.com/Download/index.aspx?lang=en-us

AMD/ATI – http://support.amd.com/us/Pages/AMDSupportHub.aspx

Acer, ASUS, Atom, Celeron, Core 2 Duo, Core 2 Quad, DELL, HP, i3, i5, i7, Intel, Microsoft, ML110 G5, ML110 G6, ML350 G5, ML350 G6, Pentium 4, Pentium D, Pentium M, ProLiant, PROSet, Samsung, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Sony, Toshiba, Windows, Windows 2000, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP, Xeon

Verify the Health and Operation of your Intel® Processor with the Intel® Processor Diagnostic Tool

A 32 and 64 bit version of the IPDT or Intel Processor Diagnostic Tool can be downloaded from here: http://www.intel.com/support/processors/sb/CS-031726.htm

You can also see a video on how to use it here: http://www.youtube.com/watch?v=tpPOqh_Bq78

You can use the diagnostic tool to test the various features of your Intel Processor and perform a stress test to ensure that it is operating in a  stable manner.

Cisco, Microsoft, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Windows, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP

A Windows Based Computer that is connected to your network via an IP Phone (NAP-Enabled) may not connect to the same VLAN after resume from hibernation

This issue applies to Windows XP – SP3, Windows Vista – SP2, Windows Server 2008 – SP2, Windows Server 2008 R2 – SP1 and Windows 7 – SP1.

This issue occurs on networks that use IEEE 802.1X authentication where the client computer or server machine is connected or bridged via a NAP-Enabled device such as an IP or VoIP Phone Handset.

The issue will not be resolved for Windows XP because it is now outside the mainstream support cycle.  Hotfixes for the other operating systems listed above can be obtain via Microsoft KB 976373 http://support.microsoft.com/kb/976373

D-Link, Fujitsu, HP, Intel, Microsoft, Primergy, ProLiant, PROSet, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Windows, Windows 2000, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP

Intel Network Adapter Diagnostics May Wrongly Report that the Network Cable is over 100 Metres Long

When you run a Cable diagnostic using the Intel PROSet Network Adapter Diagnostics you may find that the utility incorrectly reports that your network cable is over 100 Metres and/or that the Cable is faulty/poor.

This issue can occur if you have a network switch that implements “power Saving” or “Green Ethernet” this feature is meant to reduce the power to a network port that is supporting a device with a short network cable run.

This “power saving” or “Green Ethernet” feature can cause the diagnostics to fail and can sometimes contribute to network drops and/or poor network throughput.  If you have a managed/smart switch then you can normally login via a browser and “Disable” this feature to correct the issue.