Tag Archives: Diagnostics

Verify the Health and Operation of your Intel® Processor with the Intel® Processor Diagnostic Tool

A 32 and 64 bit version of the IPDT or Intel Processor Diagnostic Tool can be downloaded from here: http://www.intel.com/support/processors/sb/CS-031726.htm

You can also see a video on how to use it here: http://www.youtube.com/watch?v=tpPOqh_Bq78

You can use the diagnostic tool to test the various features of your Intel Processor and perform a stress test to ensure that it is operating in a  stable manner.

Intel Network Adapter Diagnostics May Wrongly Report that the Network Cable is over 100 Metres Long

When you run a Cable diagnostic using the Intel PROSet Network Adapter Diagnostics you may find that the utility incorrectly reports that your network cable is over 100 Metres and/or that the Cable is faulty/poor.

This issue can occur if you have a network switch that implements “power Saving” or “Green Ethernet” this feature is meant to reduce the power to a network port that is supporting a device with a short network cable run.

This “power saving” or “Green Ethernet” feature can cause the diagnostics to fail and can sometimes contribute to network drops and/or poor network throughput.  If you have a managed/smart switch then you can normally login via a browser and “Disable” this feature to correct the issue.