Tag Archives: driver

Acer, ALI, AMD, ASUS, ATI, DELL, Fujitsu, HP, Intel, Microsoft, Nvidia, Samsung, SBS 2008, Small Business Server 2008, Sony, Toshiba, VIA, Windows, Windows Server 2008, Windows Vista

Windows Vista, Windows Server 2008 and SBS 2008 with Service Pack 2 – You may find that applications stop responding, delays occur during resume from standby and/or files may become corrupt when the computer goes to sleep/hibernate and/or poor AMD processor/chipset performance

A variety of issue exist post service pack 2 with Windows Vista, Windows Server 2008 and Small Business Server 2008, a variety of hotfixes have been released since 2008 to address these issues but you only need to apply the latest to ensure that all subsequent issues are addressed.

 

You should only need to apply the hotfix from KB 980080 to ensure that all the issues below are addressed as this contains the latest versions of the affected files, this can be obtained from http://support.microsoft.com/kb/980080

 

KB 980080 – Files may be corrupted when a computer that is running Windows Vista or Windows Server 2008 enters the sleep mode or the hibernate mode

Info: http://support.microsoft.com/kb/980080

KB 977323 – After you change the SATA mode of disk devices to use the AHCI specification on a Windows Server 2008-based or Windows Vista-based computer, the computer or certain applications randomly stop responding for 60 seconds or longer

Info: http://support.microsoft.com/kb/977323

KB 974073 – An update for the Msahci.sys driver has been released for AMD chipsets

Info: http://support.microsoft.com/kb/974073

KB 971390 – A minor delay occurs when Windows Vista or Windows Server 2008 resumes from sleep if the hard disk is attached to a secondary ATA port

Info: http://support.microsoft.com/kb/971390

Acer, AMD, ASUS, ATI, BSOD, DELL, Fujitsu, HP, Microsoft, ML110 G5, ML110 G6, ML350 G5, ML350 G6, Nvidia, Primergy, ProLiant, Samsung, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Sony, Toshiba, Windows, Windows 2000, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP, XP Mode

Windows will not boot with a Stop Error 0x0000007B

A very common BSOD (Blue Screen of Death) is a STOP error 0x0000007B and may indicate either a hardware, software or driver issue.

Please see the great troubleshooting guide put together by Tim Fisher on about.com

http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

One thing that Tim does not mention is that sometimes it is necessary to slipstream the AHCI SATA Controller Drivers into your Windows XP or Windows Server 2003 installation media.  This can easily be done by downloading and using nLite to slipstream drivers and updates into your Windows XP or Windows Server 2003 CD Media, you can get the application from http://www.nliteos.com/

Common AHCI Sata Drivers include:

Intel – http://downloadcenter.intel.com (Look under Chipset, Chipset Software and then Intel Rapid Storage Technology.  You will need the F6 Drivers for either x86 or x64 depending on you using 32bit or 64bit windows)

Nvidia – http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk or http://www.nvidia.com/Download/index.aspx?lang=en-us

AMD/ATI – http://support.amd.com/us/Pages/AMDSupportHub.aspx

D-Link, Fujitsu, HP, Intel, Microsoft, Primergy, ProLiant, PROSet, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Windows, Windows 2000, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP

Intel Network Adapter Diagnostics May Wrongly Report that the Network Cable is over 100 Metres Long

When you run a Cable diagnostic using the Intel PROSet Network Adapter Diagnostics you may find that the utility incorrectly reports that your network cable is over 100 Metres and/or that the Cable is faulty/poor.

This issue can occur if you have a network switch that implements “power Saving” or “Green Ethernet” this feature is meant to reduce the power to a network port that is supporting a device with a short network cable run.

This “power saving” or “Green Ethernet” feature can cause the diagnostics to fail and can sometimes contribute to network drops and/or poor network throughput.  If you have a managed/smart switch then you can normally login via a browser and “Disable” this feature to correct the issue.

BSOD, SBS 2011, Small Business Server 2011, Windows 7, Windows Server 2008 R2

Windows 7, SBS 2011 or Windows Server 2008 R2 RTM and SP1 – Stop error message 0x0000007E and/or Kernel Sockets Leak on a Multi Processor Machine

You may suffer from a BSOD Stop Error Message with STOP: 0x0000007E and/or experience a Kernel Sockets Leak if you are running an older version of Ancillary Function Driver for Winsock or afd.sys

To prevent these two issues you need to be running the latest version of Afd.sys which can be downloaded from http://support.microsoft.com/kb/2579274