Tag Archives: Microsoft

Fujitsu, Microsoft, Primergy, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, SNMP, Windows, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2

Fujitsu Primergy Servers – SNMP RAID and Server Health Checks

1 Comment

This next post is very useful for owners of Fujitsu or Fujitsu Siemens Primergy Servers, it highlights how you can monitor the status of your servers general Health and RAID Status.  To utilise these checks you will need to have the Windows SNMP Service installed and configured.  You will also need to download and install the Fujitsu ServerView RAID Manager and the Fujitsu ServerView Agent for Windows.

These OIDs can be used with your existing Server Monitoring Software such as GFI Max Remote Management or Spiceworks to provide upto the minute information.

Logical Drive Status (Array 1) = 1.3.6.1.4.1.231.2.49.1.6.2.1.10.1.1

1 = unknown, 2 = ok, 3 = degraded, 4 = offline, 5 = rebuilding, 6 = verifying, 7 = initializing, 8 = morphing, 9 = partially degraded

Logical Drive Status (Array 2) = 1.3.6.1.4.1.231.2.49.1.6.2.1.10.1.2

1 = unknown, 2 = ok, 3 = degraded, 4 = offline, 5 = rebuilding, 6 = verifying, 7 = initializing, 8 = morphing, 9 = partially degraded

If you have more than two Logical Drives (i.e. 4 x RAID 1 Sets) then simply substitute the last number of the above OID with 3 or 4, etc to reference the next Logical Drive

Number of Logical Drives = 1.3.6.1.4.1.231.2.49.1.6.1.0

1 = 1 Logical Drive, 2 = 2 Locagical Drives, 3 = 3 Locagical Drives, etc

Number of Physical Drives = 1.3.6.1.4.1.231.2.49.1.5.1.0

1 = 1 Physical Drive, 2 = 2 Physical Drives, 3 = 3 Physical Drives, etc

Power Supply Status = 1.3.6.1.4.1.231.2.10.2.2.5.11.1.1.2.0

1 = unknown, 2 = ok, 3 = degraded, 4 = critical

Temperature Sensor Ambient = 1.3.6.1.4.1.231.2.10.2.2.5.2.1.1.3.0.11

1 = unknown, 2 = sensor-disabled, 3 = ok, 4 = sensor-fail, 5 = warning-temp-warm, 6 = warning-temp-cold, 7 = critical-temp-warm, 8 = critical-temp-cold, 9 = damage-temp-warm

Temperature Sensor CPU (1) = 1.3.6.1.4.1.231.2.10.2.2.5.2.1.1.3.0.1

1 = unknown, 2 = sensor-disabled, 3 = ok, 4 = sensor-fail, 5 = warning-temp-warm, 6 = warning-temp-cold, 7 = critical-temp-warm, 8 = critical-temp-cold, 9 = damage-temp-warm

Temperature Sensor CPU (2) = 1.3.6.1.4.1.231.2.10.2.2.5.2.1.1.3.0.2

1 = unknown, 2 = sensor-disabled, 3 = ok, 4 = sensor-fail, 5 = warning-temp-warm, 6 = warning-temp-cold, 7 = critical-temp-warm, 8 = critical-temp-cold, 9 = damage-temp-warm

Please feel free to comment if you have any other useful OIDs or require further assistance

Internet Explorer, Internet Explorer 9, SBS 2011, Small Business Server 2011, Windows, Windows 7, Windows Server 2008, Windows Server 2008 R2, Windows Vista

Internet Explorer 9 File Download Issues

Leave a comment

An issue that has been going on for some time now is an inability to correctly download certain files using Microsoft Internet Explorer 9.  You will find that the download dialog launches but the file name and type that Internet Explorer 9 displays does not correlate with the original download link.

The most likely cause of this is having a tick in the check box next to the following option

“Do Not Save Encrypted pages to disk”

You can verify this setting by opening Internet Explorer 9, clicking “Tools”, “Internet Options”, Clicking the “Advanced” tab and then scrolling down to the “Security” section.  This is where you will find the “Do Not Save Encrypted pages to disk” value.

To resolve the issue just untick the box next to “Do Not Save Encrypted pages to disk” and then close and re-launch your Internet Explorer 9 browser.