Tag Archives: 0x000000D1

Microsoft, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

Mpio.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS2011)

Leave a comment

Mpio.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS2011)

29-Mar-2012 – 6.1.7601.21953 – Mpio.sys – x64 – http://support.microsoft.com/kb/2670762 – MPIO does not log path failure events in the event log on a Windows Server 2008 R2-based computer

12-Jan-2012 – 6.1.7601.21896 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2661794 – MPIO does not remove a disk that is on a failed path in Windows Server 2008 R2

27-Aug-2011 – 6.1.7601.21802 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2591462 – A boot LUN can be disabled if it is claimed for use with MPIO in Windows 7 or in Windows Server 2008 R2

28-Jun-2011 – 6.1.7601.21758 – Mpio.sys – x64 – http://support.microsoft.com/kb/2549567 – “0x000000D1” Stop error message when you back up files to a storage device on a computer that is running Windows Server 2008 R2

20-May-2011 – 6.1.7601.21731 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2522766 – The MPIO driver fails over all paths incorrectly when a transient single failure occurs in Windows Server 2008 or in Windows Server 2008 R2

04-May-2011 – 6.1.7601.21720 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2406705 – Some I/O requests to a storage device fail on a fault-tolerant system that is running Windows Server 2008 or Windows Server 2008 R2 when you perform a surprise removal of one path to the storage device

19-Mar-2011 – 6.1.7601.21687 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2511962 – “0x000000D1” Stop error occurs in the Mpio.sys driver in Windows Server 2008 R2

11-Mar-2011 – 6.1.7601.21680 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2460971 – MPIO failover fails on a computer that is running Windows Server 2008 R2

15-Jan-2011 – 6.1.7601.21642 – Mpio.sys – x86/x64 – http://support.microsoft.com/kb/2277904 – You cannot access an MPIO-controlled storage device in Windows Server 2008 R2 after you send the “IOCTL_MPIO_PASS_THROUGH_PATH_DIRECT” control code that has an invalid MPIO path ID

Microsoft, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

Mrxsmb.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

Leave a comment

Mrxsmb.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

25-Sep-2014 – 6.1.7601.22819 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/3002297 – The SMB Redirector may hang when the SMB protocol is used in Windows 7 SP1 or Windows 8.1

25-Sep-2014 – 6.1.7601.22819 – Mrxsmb.sys – x86/x64 – https://support.microsoft.com/en-us/kb/3002286 – Delay in accessing a file server when a Windows 7-based computer connects to the file server

02-Oct-2013 – 6.1.7601.22470 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2895237 – FIX: Stop error 0X000000D1 in rdbss!RxTimerDispatch occurs on a server that is running Windows 7 Service Pack 1 or Windows Server 2008 R2 Service Pack 1

06-Sep-2013 – 6.1.7601.22443 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2885978 – 0x0000007F Stop error on a Windows 7 SP1-based or Windows Server 2008 R2 SP1-based computer

12-Jul-2013 – 6.1.7601.22382 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2728738 – You experience a long logon time when you try to log on to a Windows 7-based or a Windows Server 2008 R2-based client computer that uses roaming profiles

06-May-2013 – 6.1.7601.22318 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2847018 – The “Bytes Transmitted/sec” counter in Performance Monitor remains at zero when a file is copied from a computer to another computer that supports SMBv2

12-Dec-2012 – 6.1.7601.22191 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2792026 – Windows 7 SP1-based or Windows Server 2008 R2 SP1-based SMBv2 client computer freezes when the computer is under a heavy load

12-Dec-2012 – 6.1.7601.18027 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2792026 – Windows 7 SP1-based or Windows Server 2008 R2 SP1-based SMBv2 client computer freezes when the computer is under a heavy load

18-Oct-2012 – 6.1.7601.22137 – Mrxsmb.sys – x86/x64 – https://support.microsoft.com/kb/2775511 – An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1

09-Oct-2012 – 6.1.7601.22130 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2739674 – You cannot connect to remote computers by using the SMB protocol on a computer that is running Windows 7 or Windows Server 2008 R2

09-Oct-2012 – 6.1.7601.17970 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2739674 – You cannot connect to remote computers by using the SMB protocol on a computer that is running Windows 7 or Windows Server 2008 R2

17-Mar-2012 – 6.1.7601.21946 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2689311 – SMB commands run serially when the SMB packet-signing feature is enabled in Windows 7 SP1 or in Windows Server 2008 R2 SP1

17-Mar-2012 – 6.1.7601.17796 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2689311 – SMB commands run serially when the SMB packet-signing feature is enabled in Windows 7 SP1 or in Windows Server 2008 R2 SP1

17-Aug-2011 – 6.1.7601.21792 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2563210 – SMB connection is reset if you cancel a file operation over a network connection in Windows 7 or in Windows Server 2008 R2

15-Jul-2011 – 6.1.7601.21771 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2549724 – “0x00000044” Stop error when you access shared files in Windows Server 2008 R2 or in Windows 7

27-Apr-2011 – 6.1.7601.21714 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2536276 – MS11-043: Vulnerability in SMB Client could allow remote code execution: June 14, 2011

23-Feb-2011 – 6.1.7601.21666 – Mrxsmb.sys – x86/x64 – http://support.microsoft.com/kb/2511455 – MS11-019: Vulnerabilities in SMB Client could allow remote code execution: April 12, 2011

Intel, Microsoft, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

Usbhub.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

Leave a comment

Usbhub.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

11-Jan-2013 – 6.1.7601.22215 –  Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2798670 – USB audio stream stalls on a computer that is running Windows 7 or Windows Server 2008 R2

08-Aug-2012 – 6.1.7601.22081 –  Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2742516 – “Device has not been installed correctly” or “Device unplugged” error message when you connect a USB hub to a computer that is running Windows 7 or Windows Server 2008 R2

08-Aug-2012 – 6.1.7601.17924 –  Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2742516 – “Device has not been installed correctly” or “Device unplugged” error message when you connect a USB hub to a computer that is running Windows 7 or Windows Server 2008 R2

07-Mar-2012 – 6.1.7601.21937 –  Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2683549 – USB composite devices do not enter selective suspend mode after you resume a Windows 7 or Windows Server 2008 R2-based computer from sleep

07-Mar-2012 – 6.1.7601.17791 –  Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2683549 – USB composite devices do not enter selective suspend mode after you resume a Windows 7 or Windows Server 2008 R2-based computer from sleep

05-Nov-2011 – 6.1.7601.21855 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2621491 – USB hub stops working in Windows 7 if you click the mouse while the computer is entering sleep

21-Sep-2011 – 6.1.7601.21824 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2528984 – Functionality issues on USB devices that are connected to a Windows 7-based computer that has an Intel platform

09-Sep-2011 – 6.1.7601.21814 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2615763 – “0x000000D1” Stop error when you connect a USB composite device to a computer that is running Windows 7 or Windows Server 2008

25-Mar-2011 – 6.1.7601.21692 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2529073 – Binary files in some USB drivers are not updated after you install Windows 7 SP1 or Windows Server 2008 R2 SP1

03-Feb-2011 – 6.1.7601.21653 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2459268 – “0x0000009F” Stop error in Windows 7 or in Windows Server 2008 R2 when the computer enters or resumes from the Soft Off (S5) power state

18-Dec-2010 – 6.1.7601.21624 – Usbhub.sys – x86/x64 – http://support.microsoft.com/kb/2484031 – A USB audio device stops playing audio in Windows 7

Microsoft, Realtek, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

Tcpip.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

Leave a comment

Tcpip.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

05-Feb-2014 – 6.1.7601.22590 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2918550 – Computer leaks nonpaged pool memory when IPSEC traffic is configured to use AuthIP without encryption in Windows

05-Nov-2013 – 6.1.7601.22502 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2905412 – Stop error 0xD1 on a Windows-based computer with multiple processors

10-Oct-2013 – 6.1.7601.22477 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2896146 – Packet loss occurs when MTU is below 576 and PMTU discovery is enabled on your Windows 7 SP1 or Windows Server 2008 R2 SP1

09-Oct-2013 – 6.1.7601.22476 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885980 – FIX: A memory leak condition occurs when the FwpsAllocateCloneNetBufferlist() API is called

08-Sep-2013 – 6.1.7601.18254 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885980 – FIX: A memory leak condition occurs when the FwpsAllocateCloneNetBufferlist() API is called

06-Sep-2013 – 6.1.7601.22443 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885978 – 0x0000007F Stop error on a Windows-based computer

04-Sep-2013 – 6.1.7601.22441 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885976 – User application freezes on a Windows-based computer that uses the WFP

04-Sep-2013 – 6.1.7601.18251 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885976 – User application freezes on a Windows-based computer that uses the WFP

13-Jul-2013 – 6.1.7601.22383 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2871565 – “C000021B” error when you inject an NBL that contains multiple net buffers in Windows 7 SP1 or Windows Server 2008 R2 SP1

13-Jul-2013 – 6.1.7601.18209 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2871565 – “C000021B” error when you inject an NBL that contains multiple net buffers in Windows 7 SP1 or Windows Server 2008 R2 SP1

06-Jul-2013 – 6.1.7601.22378 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2868623 – MS13-065: Vulnerability in ICMPv6 could allow denial of service: August 13, 2013

06-Jul-2013 – 6.1.7601.18203 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2868623 – MS13-065: Vulnerability in ICMPv6 could allow denial of service: August 13, 2013

11-Jan-2013 – 6.1.7601.22215 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2524732 – An IPsec connection to back-end databases from a WTT application times out in Windows 7 or in Windows Server 2008 R2

10-Jan-2013 – 6.1.7601.22214 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

10-Jan-2013 – 6.1.7601.18048 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

04-Jan-2013 – 6.1.7601.22209 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2790655 – MS13-018: Vulnerability in TCP/IP could allow denial of service: February 12, 2013

03-Jan-2013 – 6.1.7601.18042 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2790655 – MS13-018: Vulnerability in TCP/IP could allow denial of service: February 12, 2013

30-Nov-2012 – 6.1.7601.22177 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789968 – “0x000000D1” Stop error after you install the WDK WFP “inspect” sample in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789397 – Data corruption and network issues when you run a WFP-based application on a computer that is running Windows

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789378 – Memory leak when an application uses the FwpsNetBufferListAssociateContext0 function in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2788573 – “0x00000050” Stop error when you run a WFP-based application to register a callout routine in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x64 – http://support.microsoft.com/kb/2787847 – “0x000000D1” Stop error when a storage array is attached to a network environment and running Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789397 – Data corruption and network issues when you run a WFP-based application on a computer that is running Windows

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789378 – Memory leak when an application uses the FwpsNetBufferListAssociateContext0 function in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x64 – http://support.microsoft.com/kb/2787847 – “0x000000D1” Stop error when a storage array is attached to a network environment and running Windows Server 2008 R2

28-Nov-2012 – 6.1.7601.22175 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2785146 – Data is corrupted when there is insufficient memory on a Windows-based computer

23-Nov-2012 – 6.1.7601.22172 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2741850 – TCP SACK option is always set to “true” after you enable the TCP/IP Offloading feature in Windows 7 or in Windows Server 2008 R2

18-Oct-2012 – 6.1.7601.22137 – Tcpip.sys – x86/x64 – https://support.microsoft.com/kb/2775511 – An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1

03-Oct-2012 – 6.1.7601.22124 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2750841 – An IPv6 readiness update is available for Windows 7 and for Windows Server 2008 R2

03-Oct-2012 – 6.1.7601.17964 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2750841 – An IPv6 readiness update is available for Windows 7 and for Windows Server 2008 R2

12-Sep-2012 – 6.1.7601.22112 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2754804 – FTP client does not establish a passive-mode FTP connection to an IPv4 FTP server in Windows 7 or in Windows Server 2008 R2

12-Sep-2012 – 6.1.7601.17954 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2754804 – FTP client does not establish a passive-mode FTP connection to an IPv4 FTP server in Windows 7 or in Windows Server 2008 R2

06-Sep-2012 – 6.1.7601.22108 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2738401 – Raw packet is discarded after a UDP broadcast packet is received on a computer that is running Windows 7 or Windows Server 2008 R2

20-Jul-2012 – 6.1.7601.22067 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2735855 – Network connection is slow when you run a WFP-based application on a computer that is running Windows 7 or Windows Server 2008 R2

20-Jul-2012 – 6.1.7601.17911 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2735855 – Network connection is slow when you run a WFP-based application on a computer that is running Windows 7 or Windows Server 2008 R2

14-Jul-2012 – 6.1.7601.22056 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2727330 – Default gateway is set to 0.0.0.0 if you start a Windows 7-based or Windows Server 2008 R2-based computer from an iSCSI boot device

14-Jul-2012 – 6.1.7601.17900 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2727330 – Default gateway is set to 0.0.0.0 if you start a Windows 7-based or Windows Server 2008 R2-based computer from an iSCSI boot device

09-Jul-2012 – 6.1.7601.22047 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2733445 – Incorrect time is displayed in a device that uses ICMP to synchronize time information with a Windows 7-based or Windows Server 2008 R2-based computer

09-Jun-2012 – 6.1.7601.22015 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2722392 – “0x000000F4” Stop error when you run the Device Fundamental tests in Windows 7 or in Windows Server 2008 R2

30-Mar-2012 – 6.1.7601.21954 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2688338 – MS12-032: Vulnerability in TCP/IP could allow elevation of privilege: May 8, 2012

30-Mar-2012 – 6.1.7601.17802 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2688338 – MS12-032: Vulnerability in TCP/IP could allow elevation of privilege: May 8, 2012

09-Mar-2012 – 6.1.7601.21939 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2665206 – Slow performance when you enable IPsec encryption on a specific TCP port number in Windows 7 or in Windows Server 2008 R2

11-Feb-2012 – 6.1.7601.21921 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2675785 – Data transfer speed is slow in Windows 7 or in Windows Server 2008 R2

01-Feb-2012 – 6.1.7601.21912 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2665809 – You cannot exclude ports by using the ReservedPorts registry key in Windows Server 2008 or in Windows Server 2008 R2

07-Jan-2012 – 6.1.7601.21893 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2553549 – All the TCP/IP ports that are in a TIME_WAIT status are not closed after 497 days from system startup in Windows Vista, in Windows 7, in Windows Server 2008 and in Windows Server 2008 R2

03-Jan-2012 – 6.1.7601.21889 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2661010 – IP packets are not routed through a Windows Server 2008 R2–based LAN router in a VLAN environment

21-Dec-2011 – 6.1.7601.21881 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2639793 – “0x000000C2” Stop error occurs when you use IPsec on a computer that is running Windows Server 2008, Windows Vista, Windows Server 2008 R2 or Windows 7 in a network that uses IPsec NAT-T security

02-Nov-2011 – 6.1.7601.21853 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2639824 – Multicast packets are dropped in Windows 7 or in Windows Server 2008 R2

06-Oct-2011 – 6.1.7601.21833 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2621067 – The first-returned IP address is incorrect when you use the getaddrinfo function on a multi-homed computer that is running Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2

01-Oct-2011 – 6.1.7601.21830 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2582281 – Slow failover operation if no router exists between the cluster and an application server

29-Sep-2011 – 6.1.7601.21828 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2588516 – MS11-083: Vulnerability in TCP/IP could allow remote code execution: November 8, 2011

13-Aug-2011 – 6.1.7601.21789 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2582284 – New VPN connections establish a session that has a smaller MTU value than expected in Windows Server 2008 R2 or in Windows 7

13-Aug-2011 – 6.1.7601.21789 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

12-Jul-2011 – 6.1.7601.21768 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2570170 – Performance issue when you enable the AuthNoEncap policy to handle large payloads in a network environment in Windows 7 or in Windows Server 2008 R2

18-Jun-2011 – 6.1.7601.21751 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2569391 – IPv6 DAD state does not switch back to Preferred state from Deprecated state in Windows Vista, in Windows Server 2008, in Windows 7, or in Windows Server 2008 R2

25-May-2011 – 6.1.7601.21734 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2469100 – Manually added route table entries are deleted unexpectedly when you delete an additional IP address in Windows Vista, in Windows 7, in Windows Server 2008 or in Windows Server 2008 R2

10-May-2011 – 6.1.7601.21724 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2523881 – You cannot establish an IPsec tunnel to a computer that is running Windows 7 or Windows Server 2008 R2 through a NAT device

06-May-2011 – 6.1.7601.21722 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2547057 – IP packets are not routed through a Windows Server 2008 R2–based LAN router in a VLAN environment

22-Apr-2011 – 6.1.7601.21710 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2524732 – An IPsec connection to back-end databases from a WTT application times out in Windows 7 or in Windows Server 2008 R2

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2511305 – Network throughput is not scaled up correctly if high-bandwidth PCI Express adapters and four or more processor sockets are used in Windows Server 2008 R2

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2519736 – Stop error message in Windows Server 2008 R2 SP1 or in Windows 7 SP1: “STOP: 0x0000007F”

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2525390 – The SACK option is always set to “true” even if network adapter does not support SACK for offloaded connections in Windows 7 or in Windows Server 2008 R2

17-Mar-2011 – 6.1.7601.21685 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2519644 – Stop code in the tcpip.sys driver on a computer that is running Windows Server 2008 R2: 0x000000D1

05-Mar-2011 – 6.1.7601.21675 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2470853 – IGMP v1 membership report packets are sent to incorrect destinations on a computer that is running Windows Server 2008, Windows Vista, Windows 7 or Windows Server 2008 R2

20-Jan-2011 – 6.1.7601.21645 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2472264 – You cannot customize some TCP configurations by using the netsh command in Windows Server 2008 R2

17-Jan-2011 – 6.1.7601.21643 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2477730 – The TCP Chimney Offload feature fails on all network adapters in Windows Server 2008 R2 or in Windows 7 if you disable or change the properties of a network adapter

15-Jan-2011 – 6.1.7601.21642 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2465772 – An application or service that uses Winsock API or Winsock Kernel API may randomly stop responding in Windows Server 2008 R2 or in Windows 7

18-Dec-2010 – 6.1.7601.21624 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2465408 – Applications or services cannot update their routing tables after they receive route change notifications in Windows Server 2008 R2 or in Windows 7