Tag Archives: transfer

Change of behaviour with TRAN (Transfer) key after upgrading Yealink T3X and Yealink T2X Firmware to V70

I have noticed a change of behaviour with TRAN (Transfer) key after upgrading Yealink T3X and Yealink T2X to the new V70 firmware along with upgrading 3CX Version 11 to Service Pack 3.

It appears that the default DSS Key Transfer Mode is changed from Attended Transfer to Blind Transfer.  An Attended Transfer was always performed when you used the BLF/DSS Keys to perform the Transfer in previous Yealink firmware versions.  For example A calls B wanting to speak with C, B presses TRAN button and then presses the BLF/DSS Key for C.  In this instance B should be able to speak with C (Attended Transfer) to see if they want to take the call rather than A just being passed straight to C (Blind Transfer).

yealink blind transfer

 

You need to login to the Yealink HTTP Interface and then navigate to Phone->Features->Transfer Settings and Change “Transfer Mode via DSSKey” to “Attended Transfer” by using the drop down menu.

yealink attended transfer

So by changing this simple setting you can restore the Attended Transfer function whilst still taking advantage of the V70 Firmware for your Yealink Phone.

3CX Phone System – Caller ID Incorrect with Call Pickup and Call Transfer using Aastra Handset

When you use an Aastra Handset with 3CX you may find that the correct Caller ID is not shown on the handset when you use Call Pickup or the call is transferred to your phone.  This can be corrected by adding the following line in to your provisioning template for your Aastra handsets

sip update callerid: 1

This setting Enables or disables the updating of the Caller ID information during a call, by default the phone has a value of “0” assigned but by adding this line with the value “1” you force this setting to Enabled.

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

11.6.1 – Build # 346666 Provides some new features and resolves the following issues:

• This release introduces support for the new high-performance XTM 5 Series models 515, 525, 535, and 545

• Provides an update to our localized user interfaces and documentation

• An XTM device configured in bridge mode can now pass VLAN traffic between 802.1Q switches or bridges

• FireCluster support for XTM 25, 26, and 33 wired models

• Several issues have been resolved in this release that caused XTM devices to crash when configured to use Application Control or IPS [66937, 65426, 65636, 67312, 66135, 67159, 67399, 67310]

• An issue was resolved that caused some XTM device processes to crash when running Mu Dynamics default published vulnerability test [66490]

• An issue was resolved that caused a kernel crash and device reboot [67329]

• The XTM 2 Series device can now handle a large file transfer without interface instability [67367]

• A problem that caused incorrect data to display on the XTM 5 Series LCD screen has been resolved [67197]

• Policy Manager now displays the correct VLAN limits for XTM 5 Series models 505, 510, 520, and 530 with a standard Fireware XTM feature key (not Pro) [67780]

• You can now successfully configure and apply Traffic Management actions for XTM 2 and 3 Series devices from the Web UI [67221, 66645]

• Firebox X Edge e-Series devices can now be successfully managed with templates [67658]

• The notification message sent when a local Log or Report database is down now correctly shows the host IP address instead of “???” [41731]

• The Log Server can now handle backup files greater than 2GB in size without generating an error message: “Error (8199), Exception during backup of oldest log data: File is not a zip file” exception” [66811]

• The DHCP lease activity report now works correctly [66062]

• Log Collector now handles XTM device log data that spans multiple SSL/TLS records without crashing [66347]

• A problem has been resolved that caused poor performance on XTM 2 Series models 25 and 26 because of an incorrect memory allocation for security subscription signatures [67240]

• A deny message is now correctly sent to the web browser in most cases when Application Control blocks content in the Web/Web 2.0 category [66201]

• The WebBlocker automatic database update time is no longer off by one hour when daylight savings time is in effect on the host server’s timezone [67551]

• If you use PPPoE or DHCP for an external interface on an XTM device configured to use multi-WAN, the XTM device no longer loses the default routes for external interfaces after the external interface reconnects [67424, 67520]

• A problem has been resolved that caused a static route to fail after an external interface configured to use PPPoE is disconnected, then reconnected [67520]

• Tagged VLAN traffic is now correctly recognized when an XTM device is configured in Bridge mode [64355]

• The CLl command “restore factory default all” now successfully restores a device to its factory default settings [66240]

• An issue has been resolved that caused Policy Manager to incorrectly display an interface IP address as 0.0.0.0/24 when you viewed a FireCluster configuration for a cluster in drop-in mode [63551]

• The Mobile VPN with SSL process no longer crashes during a FireCluster failover [66118]

You can download 11.6.1 – Build # 346666 from the Watchguard website

Tcpip.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

Tcpip.sys – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

05-Feb-2014 – 6.1.7601.22590 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2918550 – Computer leaks nonpaged pool memory when IPSEC traffic is configured to use AuthIP without encryption in Windows

05-Nov-2013 – 6.1.7601.22502 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2905412 – Stop error 0xD1 on a Windows-based computer with multiple processors

10-Oct-2013 – 6.1.7601.22477 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2896146 – Packet loss occurs when MTU is below 576 and PMTU discovery is enabled on your Windows 7 SP1 or Windows Server 2008 R2 SP1

09-Oct-2013 – 6.1.7601.22476 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885980 – FIX: A memory leak condition occurs when the FwpsAllocateCloneNetBufferlist() API is called

08-Sep-2013 – 6.1.7601.18254 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885980 – FIX: A memory leak condition occurs when the FwpsAllocateCloneNetBufferlist() API is called

06-Sep-2013 – 6.1.7601.22443 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885978 – 0x0000007F Stop error on a Windows-based computer

04-Sep-2013 – 6.1.7601.22441 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885976 – User application freezes on a Windows-based computer that uses the WFP

04-Sep-2013 – 6.1.7601.18251 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2885976 – User application freezes on a Windows-based computer that uses the WFP

13-Jul-2013 – 6.1.7601.22383 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2871565 – “C000021B” error when you inject an NBL that contains multiple net buffers in Windows 7 SP1 or Windows Server 2008 R2 SP1

13-Jul-2013 – 6.1.7601.18209 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2871565 – “C000021B” error when you inject an NBL that contains multiple net buffers in Windows 7 SP1 or Windows Server 2008 R2 SP1

06-Jul-2013 – 6.1.7601.22378 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2868623 – MS13-065: Vulnerability in ICMPv6 could allow denial of service: August 13, 2013

06-Jul-2013 – 6.1.7601.18203 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2868623 – MS13-065: Vulnerability in ICMPv6 could allow denial of service: August 13, 2013

11-Jan-2013 – 6.1.7601.22215 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2524732 – An IPsec connection to back-end databases from a WTT application times out in Windows 7 or in Windows Server 2008 R2

10-Jan-2013 – 6.1.7601.22214 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

10-Jan-2013 – 6.1.7601.18048 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

04-Jan-2013 – 6.1.7601.22209 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2790655 – MS13-018: Vulnerability in TCP/IP could allow denial of service: February 12, 2013

03-Jan-2013 – 6.1.7601.18042 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2790655 – MS13-018: Vulnerability in TCP/IP could allow denial of service: February 12, 2013

30-Nov-2012 – 6.1.7601.22177 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789968 – “0x000000D1” Stop error after you install the WDK WFP “inspect” sample in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789397 – Data corruption and network issues when you run a WFP-based application on a computer that is running Windows

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789378 – Memory leak when an application uses the FwpsNetBufferListAssociateContext0 function in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2788573 – “0x00000050” Stop error when you run a WFP-based application to register a callout routine in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.22176 – Tcpip.sys – x64 – http://support.microsoft.com/kb/2787847 – “0x000000D1” Stop error when a storage array is attached to a network environment and running Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789397 – Data corruption and network issues when you run a WFP-based application on a computer that is running Windows

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2789378 – Memory leak when an application uses the FwpsNetBufferListAssociateContext0 function in Windows 7 or Windows Server 2008 R2

29-Nov-2012 – 6.1.7601.18014 – Tcpip.sys – x64 – http://support.microsoft.com/kb/2787847 – “0x000000D1” Stop error when a storage array is attached to a network environment and running Windows Server 2008 R2

28-Nov-2012 – 6.1.7601.22175 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2785146 – Data is corrupted when there is insufficient memory on a Windows-based computer

23-Nov-2012 – 6.1.7601.22172 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2741850 – TCP SACK option is always set to “true” after you enable the TCP/IP Offloading feature in Windows 7 or in Windows Server 2008 R2

18-Oct-2012 – 6.1.7601.22137 – Tcpip.sys – x86/x64 – https://support.microsoft.com/kb/2775511 – An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1

03-Oct-2012 – 6.1.7601.22124 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2750841 – An IPv6 readiness update is available for Windows 7 and for Windows Server 2008 R2

03-Oct-2012 – 6.1.7601.17964 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2750841 – An IPv6 readiness update is available for Windows 7 and for Windows Server 2008 R2

12-Sep-2012 – 6.1.7601.22112 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2754804 – FTP client does not establish a passive-mode FTP connection to an IPv4 FTP server in Windows 7 or in Windows Server 2008 R2

12-Sep-2012 – 6.1.7601.17954 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2754804 – FTP client does not establish a passive-mode FTP connection to an IPv4 FTP server in Windows 7 or in Windows Server 2008 R2

06-Sep-2012 – 6.1.7601.22108 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2738401 – Raw packet is discarded after a UDP broadcast packet is received on a computer that is running Windows 7 or Windows Server 2008 R2

20-Jul-2012 – 6.1.7601.22067 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2735855 – Network connection is slow when you run a WFP-based application on a computer that is running Windows 7 or Windows Server 2008 R2

20-Jul-2012 – 6.1.7601.17911 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2735855 – Network connection is slow when you run a WFP-based application on a computer that is running Windows 7 or Windows Server 2008 R2

14-Jul-2012 – 6.1.7601.22056 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2727330 – Default gateway is set to 0.0.0.0 if you start a Windows 7-based or Windows Server 2008 R2-based computer from an iSCSI boot device

14-Jul-2012 – 6.1.7601.17900 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2727330 – Default gateway is set to 0.0.0.0 if you start a Windows 7-based or Windows Server 2008 R2-based computer from an iSCSI boot device

09-Jul-2012 – 6.1.7601.22047 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2733445 – Incorrect time is displayed in a device that uses ICMP to synchronize time information with a Windows 7-based or Windows Server 2008 R2-based computer

09-Jun-2012 – 6.1.7601.22015 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2722392 – “0x000000F4” Stop error when you run the Device Fundamental tests in Windows 7 or in Windows Server 2008 R2

30-Mar-2012 – 6.1.7601.21954 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2688338 – MS12-032: Vulnerability in TCP/IP could allow elevation of privilege: May 8, 2012

30-Mar-2012 – 6.1.7601.17802 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2688338 – MS12-032: Vulnerability in TCP/IP could allow elevation of privilege: May 8, 2012

09-Mar-2012 – 6.1.7601.21939 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2665206 – Slow performance when you enable IPsec encryption on a specific TCP port number in Windows 7 or in Windows Server 2008 R2

11-Feb-2012 – 6.1.7601.21921 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2675785 – Data transfer speed is slow in Windows 7 or in Windows Server 2008 R2

01-Feb-2012 – 6.1.7601.21912 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2665809 – You cannot exclude ports by using the ReservedPorts registry key in Windows Server 2008 or in Windows Server 2008 R2

07-Jan-2012 – 6.1.7601.21893 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2553549 – All the TCP/IP ports that are in a TIME_WAIT status are not closed after 497 days from system startup in Windows Vista, in Windows 7, in Windows Server 2008 and in Windows Server 2008 R2

03-Jan-2012 – 6.1.7601.21889 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2661010 – IP packets are not routed through a Windows Server 2008 R2–based LAN router in a VLAN environment

21-Dec-2011 – 6.1.7601.21881 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2639793 – “0x000000C2” Stop error occurs when you use IPsec on a computer that is running Windows Server 2008, Windows Vista, Windows Server 2008 R2 or Windows 7 in a network that uses IPsec NAT-T security

02-Nov-2011 – 6.1.7601.21853 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2639824 – Multicast packets are dropped in Windows 7 or in Windows Server 2008 R2

06-Oct-2011 – 6.1.7601.21833 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2621067 – The first-returned IP address is incorrect when you use the getaddrinfo function on a multi-homed computer that is running Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2

01-Oct-2011 – 6.1.7601.21830 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2582281 – Slow failover operation if no router exists between the cluster and an application server

29-Sep-2011 – 6.1.7601.21828 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2588516 – MS11-083: Vulnerability in TCP/IP could allow remote code execution: November 8, 2011

13-Aug-2011 – 6.1.7601.21789 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2582284 – New VPN connections establish a session that has a smaller MTU value than expected in Windows Server 2008 R2 or in Windows 7

13-Aug-2011 – 6.1.7601.21789 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2459530 – Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used

12-Jul-2011 – 6.1.7601.21768 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2570170 – Performance issue when you enable the AuthNoEncap policy to handle large payloads in a network environment in Windows 7 or in Windows Server 2008 R2

18-Jun-2011 – 6.1.7601.21751 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2569391 – IPv6 DAD state does not switch back to Preferred state from Deprecated state in Windows Vista, in Windows Server 2008, in Windows 7, or in Windows Server 2008 R2

25-May-2011 – 6.1.7601.21734 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2469100 – Manually added route table entries are deleted unexpectedly when you delete an additional IP address in Windows Vista, in Windows 7, in Windows Server 2008 or in Windows Server 2008 R2

10-May-2011 – 6.1.7601.21724 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2523881 – You cannot establish an IPsec tunnel to a computer that is running Windows 7 or Windows Server 2008 R2 through a NAT device

06-May-2011 – 6.1.7601.21722 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2547057 – IP packets are not routed through a Windows Server 2008 R2–based LAN router in a VLAN environment

22-Apr-2011 – 6.1.7601.21710 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2524732 – An IPsec connection to back-end databases from a WTT application times out in Windows 7 or in Windows Server 2008 R2

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2511305 – Network throughput is not scaled up correctly if high-bandwidth PCI Express adapters and four or more processor sockets are used in Windows Server 2008 R2

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2519736 – Stop error message in Windows Server 2008 R2 SP1 or in Windows 7 SP1: “STOP: 0x0000007F”

19-Mar-2011 – 6.1.7601.21687 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2525390 – The SACK option is always set to “true” even if network adapter does not support SACK for offloaded connections in Windows 7 or in Windows Server 2008 R2

17-Mar-2011 – 6.1.7601.21685 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2519644 – Stop code in the tcpip.sys driver on a computer that is running Windows Server 2008 R2: 0x000000D1

05-Mar-2011 – 6.1.7601.21675 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2470853 – IGMP v1 membership report packets are sent to incorrect destinations on a computer that is running Windows Server 2008, Windows Vista, Windows 7 or Windows Server 2008 R2

20-Jan-2011 – 6.1.7601.21645 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2472264 – You cannot customize some TCP configurations by using the netsh command in Windows Server 2008 R2

17-Jan-2011 – 6.1.7601.21643 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2477730 – The TCP Chimney Offload feature fails on all network adapters in Windows Server 2008 R2 or in Windows 7 if you disable or change the properties of a network adapter

15-Jan-2011 – 6.1.7601.21642 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2465772 – An application or service that uses Winsock API or Winsock Kernel API may randomly stop responding in Windows Server 2008 R2 or in Windows 7

18-Dec-2010 – 6.1.7601.21624 – Tcpip.sys – x86/x64 – http://support.microsoft.com/kb/2465408 – Applications or services cannot update their routing tables after they receive route change notifications in Windows Server 2008 R2 or in Windows 7