Tag Archives: CPU

Watchguard, XTM

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.5 – CSP1 Build # 419019

Leave a comment

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series –Fireware XTM OS 11.6.5 – CSP1 Build # 419019

11.6.5 CSP1 Build # 419019 Resolves the following issues:

  • This release contains further improvements to efficacy of spamBlocker with Mailshell
  • [BUG71300] Resolved a Kernel crash which occurred when using FireCluster under high traffic conditions
  • [BUG71738] Resolved Memory leak when an external interface is configured for DHCP and the DHCP server is not responding
  • [BUG71589] Resolved issue causing the firewalld process to crash.
  • [BUG67075] SNMP “Get” now displays the accurate number of Branch Office VPN tunnels.
  • [BUG70202, BUG71732, BUG70342]: Resolved issue causing Branch Office VPN traffic to stop passing when using Firebox models XTM 330, XTM 3, XTM 25/26.
  • [BUG70491] The widsd process no longer uses excess CPU
  • [BUG71926] Fixed issue causing the loggerd process to use excessive CPU.
  • [BUG71871] Improved the HTTP Proxy MSS handling to allow for MTU to be adjusted independently for the in and out proxy channels. This improvement will prevent applications like Facebook from stalling.
  • [BUG69331] Interface link down/up behavior has been improved for XTM 21-23, XTM 25/56 and XTM 33.
  • [RFE71314] The Firebox serial number will now display in the HTTP proxy deny message.
  • [BUG70955] Resolved issue causing the SSID for guest network to stop broadcasting.
  • [BUG69132] Resolved issue causing the Wireless Guest interface status to show as down but the interface continues to function.
  • [BUG70318] When using wireless the log line “ath: phy0: failed to stop TX DMA, queue=0x005!” no longer occurs.
  • [BUG72586] The hostapd debug logs no longer appear when diagnostic logging is disabled.
  • [BUG68975, RFE64455] The Firebox DHCP server now properly sends a NACK reply for devices with an existing DHCP lease.
  • [BUG71323] Resolved issue which caused Branch Office VPN IPSec VPN to stop functioning after upgrade from 11.4.x to 11.6.x or 11.7.x.
  • [BUG69493, BUG65892] Resolved issue which caused the Intel Network Interface Cards to hang and stop passing traffic for short periods of time on XTM 5-series and above.
  • [BUG72048] Resolved Cross site scripting vulnerability on the SSLVPN authentication port related to an invalid login redirect.

You can request 11.6.5 – CSP1 Build # 419019 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

3CX, 821, 870, Cisco, Exchange, Exchange 2013, IP Phones, Microsoft, Phone System, Service Pack 2, Snom, v11, V8.7.3.15, V8.7.3.15, Windows, Windows 8, Windows Server 2012

3CX Version 11 – Service Pack 2 (Build 27588.780) Released

Leave a comment

3CX Version 11 – Service Pack 2 (Build 27588.780) Released

Service Pack 2 introduces the following fixes and new features:

New Features

  • New: Added support for Windows 8 and Windows Server 2012. Previous releases of 3CX Phone System are unsupported on Windows 8 / Server 2012, and thus a new installation of SP2 is required on these OS.
  • New: Added support for Exchange Server 2013. For more information on configuring an Exchange Server 2013, review this blog post.
  • New: IP Whitelist for the Anti-Hacking module.
  • New: Blacklist is checked for WEB requests. When someone tries to connect to the web 3CX Management Console, 3CX MyPhone or provision a phone from a blacklisted IP, the request will be blocked, and the administrator is notified (if notifications are enabled).
  • New: Added support for the latest Cisco SPA 514G and 525G2 phones with the latest firmware. Please note, phones running firmware 7.4.9b need to be updated to version 7.5.2b before being upgraded to version 7.5.3. This applies to all Cisco phones.
  • New: SNOM can now be configured using Plug and Play. SNOM is now supported from the firmware version 8.7.3.15.

3CX MyPhone

  • Update: The Active Calls section in 3CX MyPhone has been redesigned. Users can only see their own calls by default. If allowed, they can see the calls to users in their group. The management group still sees everything.
  • Update: Conference calendar request (.ics) notifications are now sent even when the email server requires authentication.
  • Update: Dashes and () are stripped when an external conference number is added to the conference.
  • Fixed: A bug in 3CX MyPhone when adding callers which are on hold to a conference.
  • Fixed: The audio issues when creating conferences in 3CX MyPhone have been fixed.
  • Fixed: The bug which caused the Microsoft Outlook plugin to not create journal entries for incoming calls
  • Fixed: The organizer’s email address is now stored correctly when scheduling conference calls.
  • Fixed: The organizer of a conference is now informed when a user has accepted or declined the conference invitation and details are correctly retrieved from the calendar.
  • Fixed: When changing the language to Portuguese, 3CX MyPhone now loads in Portuguese.

3CX Phone System Server

  • Update: 3CX Phone System User Agent string now contains the version number.
  • Update: Added G729 Support for Patton Gateway Templates BRI devices which has fixed the audio issues.
  • Fixed: Caller ID is not retained when call is diverted (using 302 diversion header).
  • Fixed: Bug in 302 diversion header – Diversion header contents are now enclosed in <>
  • Fixed: Crash of 3CX Phone System caused by incorrectly configured Outbound Rules.
  • Fixed: Exception in Call History service when an email is sent to an invalid address.

IP Phone, PSTN Gateway and VoIP Provider Interoperability

  • New: Grandstream HT 701, 702, and 704 templates have been added to  main 3CX Phone System installer.
  • Update: Firmware auto-provisioning is removed in Grandstream templates.

3CX Web Reports

  • Update: Ring group reports have been moved to Advanced Call Reports.
  • Update: In the extension statistics, a limit of 10,000 call records has been hard coded which has sped up the report.
  • Fixed: Call Logs are properly generated on Italian language operating systems.
  • Fixed: Calls that breach SLA time are now shown correctly.
  • Fixed: Bug where the SLA breach time was not being observed and all calls where marked as breaching SLA.

3CX Management Console (Interface)

  • Update: Outbound rules page now shows the Extension Groups in the summary page.
  • Update: Added exception in the Windows Firewall for the 3CX Windows Management Console. This is required for the 3CX Firewall Checker.
  • Update: Moved configuration of the Billing Information from the top menu bar to the Advanced page.
  • Update: Server Activity Log now indicates when a packet is dropped because of a hacking attempt.
  • Update: Email notification sent to a 3CX Administrator or Operator extension when the 3CX Upgrade Insurance is about to expire.
  • Update: Improved general speed of Windows-based 3CX Management Console.
  • Update: Tagged license messages in the Server Activity Log.
  • Update: The size of the Abyss webserver log file has been minimalised as the file is now backed up and recreated.
  • Fixed: Service pack updating fails when Microsoft Management Console (MMC) is running on the computer.
  • Fixed: Provisioning of 3CXPhone for Windows, iPhone, and Android now sets the STUN server to the Public IP address of 3CX Phone System. (Note: Public IP Address needs to be configured).
  • Fixed: The 3CX VAD integration when text to speech project is deployed with characters containing an accent.
  • Fixed: IP blacklisted entries not completely removed causing a delay and high CPU usage on incoming calls.
  • Fixed: Crash in the Server Activity Log when logs are viewed in Google Chrome.
  • Fixed: There will no longer be any blank pages within the Server Activity Log.
  • Fixed: Log files were not being moved to backup folder and remained in the Logs folder. As a result this made the 3CX Management Console very slow and affected also the general performance of the computer.
  • Update: The 3CX Server Activity Log now shows INVITE and RE-INVITE SIP messages. These can be seen when Verbose is enabled.

3CX Log Viewer

  • Update: Gradual opening of logs to avoid high CPU usage.
  • Fixed: Various memory leaks.

3CX Backup and Restore

  • Fixed: The crash that occurs on Russian language Windows Operating Systems.
  • Fixed: Exception in 3CX Backup and Restore when a backup is made whilst a recording or a voicemail is in progress.
  • Fixed: 3CX Backup and Restore will now backup recordings when recordings path is not the default directory.
  • Fixed: The restore procedure will create recordings file structure in case it does not exist.
21, 22, 23, 25, 26, 33, 330, 505, 510, 515, 520, 525, 530, 535, 545, 810, 820, 830, FireBox, GFI, System Manager, Watchguard, XTM

WatchGuard XTM Firewall SNMP OID and Value List

Leave a comment

WatchGuard XTM Firewall SNMP OID and Value List

CPU Utilisation in last 5 seconds

OID: .1.3.6.1.4.1.3097.6.3.4.0

Return Value: Numeric (i.e. 234 = 2.34%)

CPU Utilisation in last 1 minute

OID: .1.3.6.1.4.1.3097.6.3.77.0

Return Value: Numeric (i.e. 234 = 2.34%)

CPU Utilisation in last 5 minutes

OID: .1.3.6.1.4.1.3097.6.3.78.0

Return Value: Numeric (i.e. 234 = 2.34%)

CPU Utilisation in last 15 minutes

OID: .1.3.6.1.4.1.3097.6.3.79.0

Return Value: Numeric (i.e. 234 = 2.34%)

Currently Active Connections

OID: .1.3.6.1.4.1.3097.6.3.80.0

Return Value: Numeric (i.e. 44 = 44 Active Connections)

Microsoft, SBS 2008, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Small Business Server 2008, Windows, Windows Server 2008, Windows Vista

Msado15.dll – Revision History for Windows Vista SP2, Windows Server 2008 SP2 and Windows Small Business Server 2008 (SBS 2008)

Msado15.dll – Revision History for Windows Vista SP2, Windows Server 2008 SP2 and Windows Small Business Server 2008 (SBS 2008)

12-Jan-2012 – 6.0.6002.22777 – Msado15.dll – x86/x64 – http://support.microsoft.com/kb/983246 – “Type Mismatch” error message when you run a VBA macro in a 64-bit version of an Office 2010 application

31-Mar-2011 – 6.0.6002.22622 – Msado15.dll – x86/x64 – http://support.microsoft.com/kb/2425981 – A process consumes high CPU usage or stops responding if the process calls the CreateMHTMLBody method of CDOSYS in Windows Server 2008 or in Windows Vista

28-Apr-2010 – 6.0.6002.22393 – Msado15.dll – x86/x64 – http://support.microsoft.com/kb/982592 – An “Access violation” error may occur when you run an ADO query to obtain a recordset in asynchronous mode on a computer that is running Windows Server 2008

03-Dec-2009 – 6.0.6002.22280 – Msado15.dll – x86/x64 – http://support.microsoft.com/kb/978042 – FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2