Tag Archives: CSP1

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6 – CSP1 Build # 345395

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6 – CSP1 Build # 345395

11.6 – CSP1 Build # 345395 Resolves the following issues:

BUG67424: Multi-WAN default route path lost on other external interfaces after PPPoE reconnect

BUG67731: Default Gateway route missing issues when using Multi-WAN with DHCP interfaces

BUG67520: Unable to ping static route network while multi wan’s pppoe I/F is disconnected

BUG66937: Kernel- unable to handle kernel NULL pointer dereference at 000002

BUG67399: XTM8 crash BUG: unable to handle kernel paging request at 780fed1e EIP c11f7cf6

BUG67312: XTM2050 crash BUG: unable to handle kernel paging request at cf9f9f5e EIP 4120667e

BUG67159: XTM5 A/P Cluster Kernel Crash  EIP: 0060:[<c11e02bb>]

BUG66135: XTM510 11.5.2  Kernel Crash EIP c11e035b

BUG65426: A/P FireCluster rebooted Pid: 1343, comm: bwdrv_wq/0 Tainted: P EIP c11e06cb

You can request 11.6 – CSP1 Build # 345395 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.5.1 – CSP1 Build # 332728

Watchguard XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.5.1 – CSP1 Build # 332728

11.5.1 – CSP1 Build # 332728 Resolves the following issues:

BUG62883: warning information in start information

BUG64465: Kernel crash on XTM8 EIP:0060:[ e0f1e711] Tainted: P VLI

BUG63683: Stack trace on XTM8 A/A Master Firebox after 3 days

BUG63588: no default route added after configure external interface.

BUG62535: the link monitor doesn’t work for ping target

BUG64251: When 10-20Mbits/s UDP traffic pass through BOVPN tunnel, kernel call trace and master crash.

BUG64280: SNAT load balance – server states toggle between “online” and “offline”

BUG63136: HTTP downloads stalling with HTTP proxy and IPS enabled

BUG64292: Dynamic NAT per Policy needs Secondary IP listed on Interface which is NATing

You can request 11.5.1 – CSP1 Build # 332728 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP1

Watchguard XTM 2 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.4.2 – CSP1

11.4.2 – CSP1 Resolves the following issues:

BUG61760: Authentication failing or slow with hundreds of Firebox DB authentication at same time

BUG62019: BOVPN tunnels would not establish after upgrade from 11.3.2 to 11.4.1 using IPSec Certificates

BUG61916: XTM1050 xt_session module fails to add session due to limit of 1000

BUG61009: 1-to-1 NAT with SIP-ALG not working properly

BUG59407, BUG62074: resolved several issues causing certificates to not sync properly when using FireCluster Active/Passive.  Improper syncing resulted in missing certificates

BUG62352: iOS PPTP connection may fail when connected from a 3G line

You can request 11.4.2 – CSP1 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.

Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.