Tag Archives: Bug

[RESOLVED] Google Android ICS 4.0, 4.01 or 4.02 – Handset Crashes and Reboots when you try to connect to an IPSec Xauth PSK VPN over the 3G Mobile Network

You may find that your Google Android ICS 4.0, 4.01 or 4.02 Smart Phone crashes and reboots when you try to connect to an IPSec Xauth PSK VPN over the 3G Mobile Network.  This has been seen to occur with Watchguard and Cisco VPN connections and is related to a glitch in the Google Android Modem Driver.

You will need to wait for an Over the Air update to Google Android 4.0.3 for the issue to be resolved, if this issue is severely affecting you then you may be able to contact your moile network carrier and/or the handset manufacturer to arrange to have the phone updated earlier.

Further information about this issue can be found here: http://code.google.com/p/android/issues/detail?id=23404&can=1&q=vpn%20xauth&colspec=ID Type Status Owner Summary Stars

Watchguard XTM Firewall and UTM Appliance – High CPU Usage in the GAV (gateway anti-virus) scand process causes lag and typing delay in Remote Desktop Sessions (RDP) and SIP or VoIP latency issues

Watchguard XTM Firewall and UTM Appliance – High CPU Usage in scand process causes lag and typing delay in Remote Desktop Sessions (RDP).  You may find that remote users report a lag with Remote Desktop Sessions, freezing sessions, black screen and random disconnections.  At around the same time users report these issues you may find that the CPU usage of the scand process on your Watchguard has increased to 100% and the majority of the activity is attributed to the scand process.  You may be able to recreate this issue by browsing websites that utilise lots of Adobe Flash or Media Content as GAV will need to scan all these elements of the web page.  Login to the Watchguard System Manager and then open Firebox System Manager click on Status Report and scroll down the report until you find the Process List (Screenshot Below).  This information will automatically update every 30 seconds so you can see the %CPU column will change and update every 30 seconds.  The top value system shows the overall CPU utilisation and if you look further down you can see which sub processes are actually occupying the CPU time and making up the overall system usage.  In the screenshot below we can see that system is showing 100 % CPU Usage and then further down we can see that the scand process is accounting for 90.99% of this.  When the CPU Usage reaches 100% on the Watchguard unit it may stop forwarding other traffic and this accounts for the lag and jitter we see within the Remote Desktop Session.  Other time sensitive traffic such as VoIP or SIP traffic may also be affected by this issue as the packets are delayed whilst the Firewall recovers from the resource exhaustion.  Users may also report that web pages are slow to load at the time these issues occur where the GAV process is still dealing with the other requests.

Resolution/Workaround:

You can try disabling the GAV (gateway antivirus) for the HTTP and FTP Proxy to ensure that this is the actual cause of your issues, if the problem subsides then you may need to consider updating the XTM OS to the latest release i.e. 11.5.2 and/or adjusting the GAV policy so that it does not scan some content i.e. Images/Text within websites.  You may also need to consider opening a support case with Watchguard to make them aware of this issue, if you have a large number of users then you may even need to consider upgrading your XTM appliance to a larger unit i.e. XTM 23 to XTM 505 or XTM 22 to XTM330 to provide additional processing power (CPU) and system resources to cope with the additional anti-virus scanning requirements.

Watchguard XTM High CPU Usage scand
Watchguard XTM High CPU Usage scand