Tag Archives: Screen

Winload.exe – Pre Service Pack 1 Revision History for Windows 8 RTM

Winload.exe – Pre Service Pack 1 Revision History for Windows 8 RTM

08-May-2013 – 6.2.9200.20709 – Winload.exe – x86/x64 – http://support.microsoft.com/kb/2841194 – You cannot start a Windows 8-based computer that has MBR disk installed

06-May-2013 – 6.2.9200.16603 – Winload.exe – x86/x64 – http://support.microsoft.com/kb/2841194 – You cannot start a Windows 8-based computer that has MBR disk installed

18-Sep-2012 – 6.2.9200.20519 – Winload.exe – x86/x64 – http://support.microsoft.com/kb/2756559 – Windows 8 restarts to a blank screen after a standard shutdown or hibernation

18-Sep-2012 – 6.2.9200.16418 – Winload.exe – x86/x64 – http://support.microsoft.com/kb/2756559 – Windows 8 restarts to a blank screen after a standard shutdown or hibernation

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

11.6.1 – Build # 346666 Provides some new features and resolves the following issues:

• This release introduces support for the new high-performance XTM 5 Series models 515, 525, 535, and 545

• Provides an update to our localized user interfaces and documentation

• An XTM device configured in bridge mode can now pass VLAN traffic between 802.1Q switches or bridges

• FireCluster support for XTM 25, 26, and 33 wired models

• Several issues have been resolved in this release that caused XTM devices to crash when configured to use Application Control or IPS [66937, 65426, 65636, 67312, 66135, 67159, 67399, 67310]

• An issue was resolved that caused some XTM device processes to crash when running Mu Dynamics default published vulnerability test [66490]

• An issue was resolved that caused a kernel crash and device reboot [67329]

• The XTM 2 Series device can now handle a large file transfer without interface instability [67367]

• A problem that caused incorrect data to display on the XTM 5 Series LCD screen has been resolved [67197]

• Policy Manager now displays the correct VLAN limits for XTM 5 Series models 505, 510, 520, and 530 with a standard Fireware XTM feature key (not Pro) [67780]

• You can now successfully configure and apply Traffic Management actions for XTM 2 and 3 Series devices from the Web UI [67221, 66645]

• Firebox X Edge e-Series devices can now be successfully managed with templates [67658]

• The notification message sent when a local Log or Report database is down now correctly shows the host IP address instead of “???” [41731]

• The Log Server can now handle backup files greater than 2GB in size without generating an error message: “Error (8199), Exception during backup of oldest log data: File is not a zip file” exception” [66811]

• The DHCP lease activity report now works correctly [66062]

• Log Collector now handles XTM device log data that spans multiple SSL/TLS records without crashing [66347]

• A problem has been resolved that caused poor performance on XTM 2 Series models 25 and 26 because of an incorrect memory allocation for security subscription signatures [67240]

• A deny message is now correctly sent to the web browser in most cases when Application Control blocks content in the Web/Web 2.0 category [66201]

• The WebBlocker automatic database update time is no longer off by one hour when daylight savings time is in effect on the host server’s timezone [67551]

• If you use PPPoE or DHCP for an external interface on an XTM device configured to use multi-WAN, the XTM device no longer loses the default routes for external interfaces after the external interface reconnects [67424, 67520]

• A problem has been resolved that caused a static route to fail after an external interface configured to use PPPoE is disconnected, then reconnected [67520]

• Tagged VLAN traffic is now correctly recognized when an XTM device is configured in Bridge mode [64355]

• The CLl command “restore factory default all” now successfully restores a device to its factory default settings [66240]

• An issue has been resolved that caused Policy Manager to incorrectly display an interface IP address as 0.0.0.0/24 when you viewed a FireCluster configuration for a cluster in drop-in mode [63551]

• The Mobile VPN with SSL process no longer crashes during a FireCluster failover [66118]

You can download 11.6.1 – Build # 346666 from the Watchguard website

Errata.inf – Pre Service Pack 2 Revision History for Windows 7 SP1, Windows Server 2008 R2 SP1 and Windows Small Business Server 2011 (SBS 2011)

Errata.inf- Pre Service Pack 2 Revision History for Windows 7 SP1, Windows Server 2008 R2 SP1 and Windows Small Business Server 2011 (SBS 2011)

09-Mar-2012 – 6.1.7601.21939 – Errata.inf – x86/x64 – http://support.microsoft.com/kb/2687190 – Computer that supports the iLO 3 feature cannot enter hibernation in Windows 7 SP1 or in Windows Server 2008 R2 SP1

12-Feb-2011 – 6.1.7601.21659 – Errata.inf – x86/x64 – http://support.microsoft.com/kb/2496744 – A black screen is displayed when a Windows 7 SP1-based or Windows Server 2008 R2 SP1-based computer tries to enter hibernation

12-Feb-2011 – 6.1.7601.17559 – Errata.inf – x86/x64 – http://support.microsoft.com/kb/2496744 – A black screen is displayed when a Windows 7 SP1-based or Windows Server 2008 R2 SP1-based computer tries to enter hibernation

Display.dll – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

Display.dll – Pre Service Pack 2 Revision History for Windows Server 2008 R2 SP1, Windows 7 SP1 and Windows Small Business Server 2011 (SBS 2011)

19-Jul-2012 – 6.1.7601.22061 – Display.dll – x86/x64 – http://support.microsoft.com/kb/2726399 – You cannot change the DPI setting through a Remote Desktop session on a computer that is running Windows 7 or Windows Server 2008 R2

07-Jan-2012 – 6.1.7601.21893 – Display.dll – x86/x64 – http://support.microsoft.com/kb/2661641 – Explorer.exe process crashes when you close the Screen Resolution dialog box in Windows 7 or

in Windows Server 2008 R2

07-Jan-2012 – 6.1.7601.17757 – Display.dll – x86/x64 – http://support.microsoft.com/kb/2661641 – Explorer.exe process crashes when you close the Screen Resolution dialog box in Windows 7 or

in Windows Server 2008 R2