Tag Archives: problem

32.70.23.4, 38.70.23.4, 3CX, 6.70.0.111, 6.70.0.111, 7.70.0.111, 9.70.0.111, Phone System, Service Pack 3, T20P, T22P, T26P, T28P, T32G, T38G, v11, Yealink

Change of behaviour with TRAN (Transfer) key after upgrading Yealink T3X and Yealink T2X Firmware to V70

Leave a comment

I have noticed a change of behaviour with TRAN (Transfer) key after upgrading Yealink T3X and Yealink T2X to the new V70 firmware along with upgrading 3CX Version 11 to Service Pack 3.

It appears that the default DSS Key Transfer Mode is changed from Attended Transfer to Blind Transfer.  An Attended Transfer was always performed when you used the BLF/DSS Keys to perform the Transfer in previous Yealink firmware versions.  For example A calls B wanting to speak with C, B presses TRAN button and then presses the BLF/DSS Key for C.  In this instance B should be able to speak with C (Attended Transfer) to see if they want to take the call rather than A just being passed straight to C (Blind Transfer).

yealink blind transfer

 

You need to login to the Yealink HTTP Interface and then navigate to Phone->Features->Transfer Settings and Change “Transfer Mode via DSSKey” to “Attended Transfer” by using the drop down menu.

yealink attended transfer

So by changing this simple setting you can restore the Attended Transfer function whilst still taking advantage of the V70 Firmware for your Yealink Phone.

11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 11.6.1, 21, 22, 23, 25, 26, 33, 330, 505, 510, 515, 520, 525, 530, 535, 545, 810, 820, 830, System Manager, Watchguard, WSM, XTM

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

Leave a comment

Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – Build # 346666

11.6.1 – Build # 346666 Provides some new features and resolves the following issues:

• This release introduces support for the new high-performance XTM 5 Series models 515, 525, 535, and 545

• Provides an update to our localized user interfaces and documentation

• An XTM device configured in bridge mode can now pass VLAN traffic between 802.1Q switches or bridges

• FireCluster support for XTM 25, 26, and 33 wired models

• Several issues have been resolved in this release that caused XTM devices to crash when configured to use Application Control or IPS [66937, 65426, 65636, 67312, 66135, 67159, 67399, 67310]

• An issue was resolved that caused some XTM device processes to crash when running Mu Dynamics default published vulnerability test [66490]

• An issue was resolved that caused a kernel crash and device reboot [67329]

• The XTM 2 Series device can now handle a large file transfer without interface instability [67367]

• A problem that caused incorrect data to display on the XTM 5 Series LCD screen has been resolved [67197]

• Policy Manager now displays the correct VLAN limits for XTM 5 Series models 505, 510, 520, and 530 with a standard Fireware XTM feature key (not Pro) [67780]

• You can now successfully configure and apply Traffic Management actions for XTM 2 and 3 Series devices from the Web UI [67221, 66645]

• Firebox X Edge e-Series devices can now be successfully managed with templates [67658]

• The notification message sent when a local Log or Report database is down now correctly shows the host IP address instead of “???” [41731]

• The Log Server can now handle backup files greater than 2GB in size without generating an error message: “Error (8199), Exception during backup of oldest log data: File is not a zip file” exception” [66811]

• The DHCP lease activity report now works correctly [66062]

• Log Collector now handles XTM device log data that spans multiple SSL/TLS records without crashing [66347]

• A problem has been resolved that caused poor performance on XTM 2 Series models 25 and 26 because of an incorrect memory allocation for security subscription signatures [67240]

• A deny message is now correctly sent to the web browser in most cases when Application Control blocks content in the Web/Web 2.0 category [66201]

• The WebBlocker automatic database update time is no longer off by one hour when daylight savings time is in effect on the host server’s timezone [67551]

• If you use PPPoE or DHCP for an external interface on an XTM device configured to use multi-WAN, the XTM device no longer loses the default routes for external interfaces after the external interface reconnects [67424, 67520]

• A problem has been resolved that caused a static route to fail after an external interface configured to use PPPoE is disconnected, then reconnected [67520]

• Tagged VLAN traffic is now correctly recognized when an XTM device is configured in Bridge mode [64355]

• The CLl command “restore factory default all” now successfully restores a device to its factory default settings [66240]

• An issue has been resolved that caused Policy Manager to incorrectly display an interface IP address as 0.0.0.0/24 when you viewed a FireCluster configuration for a cluster in drop-in mode [63551]

• The Mobile VPN with SSL process no longer crashes during a FireCluster failover [66118]

You can download 11.6.1 – Build # 346666 from the Watchguard website

10.6.3, Apple, iBooks, iPad, iPhone, iPod, iTouch, iTunes, Microsoft, SBS 2003, SBS 2008, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 3, Service Pack 3, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Windows, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP, XP Mode

Apple release iTunes 10.6.3 (32 Bit and 64 Bit Editions)

Apple iTunes 10.6.3 (32 Bit and 64 Bit) has recently been released and includes the following new features and fixes:

  • Addresses a problem where iTunes may become unresponsive when syncing an iPad (1st generation) that contains an iBooks textbook
  • Fixes a problem where photos synced to a device may appear in an unexpected order
  • Resolves an issue where iTunes may unexpectedly delete playlists created on a device
  • Fixes issues where iTunes may unexpectedly delete apps on a device
  • Improves overall performance and reliability

You can download the 32 Bit or the 64 Bit version from the Apple Website:

iTunes 10.6.3 for Windows (32 bit Edition) – http://support.apple.com/kb/DL1426

iTunes 10.6.3 for Windows (64 bit Edition) – http://support.apple.com/kb/DL1427

Microsoft, SBS 2008, Service Pack 1, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Small Business Server 2008, Windows, Windows Server 2008, Windows Vista

Windows Vista, Server 2008 and SBS 2008 Service Pack 2 – You may find that Memory Manager can no longer commit Memory Pages resulting in applications and services experiencing performance and reliability issues

If you are running Windows Vista, Windows Server 2008 or Windows Small Business Server 2008 with Service Pack 2 you may find that Memory Manager can no longer commit Memory Pages resulting in applications and services experiencing performance and reliability issues.

This issue occurs because the Memory Manager incorrectly attempts to return more memory pages than have actually been allocated.

The issue can be resolved by applying the hotfix KB 2619529 http://support.microsoft.com/kb/2619529