Tag Archives: patch

Microsoft, SBS 2008, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 2, Service Pack 2, Service Pack 2, Service Pack 2, Small Business Server 2008, Small Business Server 2011, Windows, Windows 7, Windows Server 2008, Windows Server 2008 R2, Windows Vista

[RESOLVED] 32 Bit Application or Game with the /LARGEADDRESSAWARE option running on a 64 Bit Version of Windows Vista, Windows Server 2008, Windows SBS 2008, Windows 7, Windows Server 2008 R2 or Windows SBS 2011 may generate an error message

When you run a 32 Bit Application or Game with the /LARGEADDRESSAWARE option on a 64 Bit Version of Windows you may receive one of the following errors

  • WSANO_DATA
  • ERROR_NO_DATA (232)
  • ERROR_NOACCESS (998)

These errors will occur if the application consumes large amounts of memory, the kernel denies read or write access to the address and returns an error to the application.

The Microsoft Knowledgebase article KB 2588507 provides a hotfix to address these issues http://support.microsoft.com/kb/2588507/en-gb

To apply this hotfix, you must be running one of the following 64 Bit operating systems:

  • Windows Vista Service Pack 2 (SP2)
  • Windows Server 2008 Service Pack 2 (SP2)
  • Windows 7 (RTM)
  • Windows 7 Service Pack 1 (SP1)
  • Windows Server 2008 R2 (RTM)
  • Windows Server 2008 R2 Service Pack 1 (SP1)
Microsoft, SBS 2011, Service Pack 1, Service Pack 1, Service Pack 1, Service Pack 1, Small Business Server 2011, Windows, Windows 7, Windows Server 2008 R2

[RESOLVED] A process that is being terminated stops responding in Windows 7 or Windows Server 2008 R2 or Small Business Server 2011

You may find that when you try to terminate a process on Windows 7, Windows Server 2008 R2, Windows Small Business Server 2011 SBS 2011 that the termination process stops responding.  The main thread of the process becomes blocked and if you analyse the call stack of the process you will see that a thread is blocked in the ntdll!NtReleaseKeyedEvent() function.  This occurs because of a race condition whereby the main thread that is trying to terminate the process also tries to reactivate another thread when the thread released an SRW lock.

This issue can be resolved by installing a hotfix containing an updated Ntdll.dll driver.  You can find the hotfix download link in Microsoft KB 2582203 http://support.microsoft.com/kb/2582203

Belkin, D-Link, HP, Intel, Linksys, Marvell, Microsoft, ML110 G5, ML350 G5, ML350 G6, Netgear, Nvidia, ProLiant, Ralink, Realtek, SBS 2003, SBS 2008, SBS 2011, Small Business Server 2003, Small Business Server 2008, Small Business Server 2011, Windows 7, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP

How to update Network Adapter and Wireless Adapter Drivers within Windows

You may be finding that your network or internet connection is slow or unreliable, you may also find that your computer responds far more slowly whilst you are using network resources because your network adapter drivers are not fully optimised. Wireless network adapter users may find that they cannot connect to some wireless points and/or that wireless range is not what they expect.

Any of these issues could be related to using outdated network adapter drivers so update them.

The primary types of network adapter that you will find in use today are PCI, PCI-Express or USB.  Even wireless and cabled network adapters that are integrated into a laptop or computer will still use one of these fundamental bus types.  Despite who you bought your laptop or computer from (i.e. Dell, HP, Acer, Sony) you will most likely find that a thrd party supplied the network adapter module or chip.  This is actually a good thing because it means that you are not restricted to the often outdated drivers that your system manufacturer will issues when your machine is first produced but then subsequently forget about and never update.

The process to update the drivers usually involves downloading and extracting the zipped/compressed driver file and then using Device Manager to verify and update the drivers are compatible and will install.  You will usually find that the extracted drivers folder includes an “inf” file and various “dll” files.

Once you have the drivers downloaded and extracted on your machine its time to launch Device Manager and find the network adapter that you wish to update the drivers for. On my example machine we want to update the Realtek PCIe Gigabit Adapter so we will double click on it and verify the current driver version.

Here we can see the driver version is “7.23.623.2010 and the date the drivers were released is “23/06/2010”.

Now we want to click “Update Driver” and select the location of the new drivers that we downloaded earlier. To do this we need to click “Browse my computer for driver software” and then selecte the location of the extracted driver files.

Once we have carried out the update the new version will show along with the updated driver release date.

You will usually find that the network adapter in your computer or laptop is manufactured by one of the companies listed below, next to each manufacturer is also a link to the official driver download/support page.

Intel           http://downloadcenter.intel.com
Realtek      http://www.realtek.com.tw/downloads/
Broadcom http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php
Nvidia        http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk
Marvell      http://www.marvell.com/support/downloads/search.do
Ralink        http://www.ralinktech.com/en/04_support/support.php?sn=500
D-Link       http://www.d-link.co.uk/support
Netgear      http://support.netgear.com/app/
Linksys       http://homesupport.cisco.com/en-eu/support/linksys
Belkin         http://www.belkin.com/uk/support/